Butterfly Valve Bonded Seat Wafer Centric PN10 / PN16
Unison Butterfly Valves are designed with strict adherence to material and valve standards. Additionally, we pay careful attention to retrofitting, cost and reliability. Our actuated butterfly valves are life tested for quality assurance. Furthermore, our quality control process has evolved to ensure routine chemical and mechanical checks with complete material tracking.
​
Salient Features:
-
Easy Installation (No additional gaskets required)
-
Designed and tested for long life
-
Interchangeability of parts makes the valve easy to service and diagnose issues
-
Compatibility with multiple flange standards
-
Low-pressure drop across the valve ensures maximum flow and low power requirements
-
High-quality primer and paint for harsh environments (optional)
-
​Suitable for dead end service
Specifications
Design Standard: API 609, MSS SP-67, BS 5155
Pressure Class: #125, PN10, PN16
Temperature Range: -40°C to 120°C for EPDM
-30°C to 120°C for Nitrile
-40°C to 200°C for Silicone
Face to Face: API 609, ISO 5752, BS 5155, IS 13095, MSS SP-67
Flanges: ASME B16.5, ASME B16.1, ANSI/AWWA C207-94, IS 6418, IS13095, PN10, PN16, BS 4504 T10/T16, BS 5155, MSS SP-67, BS 10 Table D/E/F/H
Actuator Mounting: ISO 5211
Leak Rate: Bubble tight shut off ANSI FSI 70-2 Class VI
Testing & Inspection: API 598, MSS SP-67
Pressure and Leak Testing
Bill of Material
Dimension Table
Notes:
All sizes are in mm unless otherwise specified.
Valve body may be made available with grade higher than FG220 as per IS 210 and higher than EN-GFS-400-15 as per DIN EN 1563:2012 or higher than 400/15 as per IS 1865-1991.
Disc may be made available with grade higher than SG 350/22 for SGI as per IS 1865.
Automation and customizations can be made available as per customer request.
DUE TO CONTINUOUS DEVELOPMENT, WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE